Features:

• Thick film resistor protected by liquid crystal polymer resin

• Excellent heat cycle characteristics

• Encapsulated with flame retardant resin molding. (UL94 V-0)

• High operating temperature range up to 180℃

• Products meet EU-RoHS requirements. EU-RoHS regulation  is not intended for Pb-glass contained in electrode, resistorelement and glass.

• AEC-Q200 Tested.

Applications:

• Automotive ECU, etc.

• Industrial Batteries, etc. 

Features:

• Flame retardant coating（UL94 V-0）.

• Products meet EU-RoHS requirements.

• It has excellent pulse resistance and is suitable as a surface
  
  mount component for precharge resistance, snubber resistance,
  
  and damping resistance.

• AEC-Q200 Tested.

Applications:

• Car electronics 

• Industrial equipment

• Features

• In normal condition, it works as a resistor and when excessive voltage is applied, it protects circuits by fusing quickly.

• The same shape as RK73 series.

• Recognized by safety standard UL1412. (1J is not recognized.)

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Features

• Small and light weight.

• Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film.

• High stability and high reliability with the triple layers structure of electrode.

• Applicable to various kinds of automatic mounters for taping, etc.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.

       EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified (Exemption 1F).

Features

• Small size and light weight

• Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film.

• High stability and high reliability with the triple-layer structure of electrode.

• Applicable to various kinds of automatic mounters for taping, etc.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.EU-RoHS regulation is not intended for 

• Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified (Except 1F)

Features

• Metal-glaze thick film resistor for surface mounting.

• High precision resistor with T.C.R. ±50×10-6/K and tolerance ±0.25%.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified.

Applications

• VCO.

• Replacement of metal film chip resistors.

Features

• Interlayer embedding in the multilayer substrate is 

  applicable from the height of 0.14mm.

• Cu via hole connection is applicable by the Cu electrode.

Applications

• Communication module, Semiconductor packaging substrate

• Smart phone, Tablet PC, Notebook PC, Wearable Device　etc

Features

• Small and light weight.

• Excellent heat resistance and weather resistance, because of the use of

  glaze thick film as resistive film.

• High stability and high reliability because of the triple-layer structure of electrode.

• Applicable to various kinds of automatic mounters for taping, etc.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, 

  resistor element and glass.

• AEC-Q200 Qualified(Except 1F).

Features

• Flat chip resistors of wide terminal type.

• High reliability and performance with T.C.R. ±100×10-6/K

  resistance tolerance ±0.5%

• Suitable for both reflow and flow solderings.

• Products meet EU-RoHS requirements. 

• EU-RoHS regulation is not intended for Pb-glass contained in electrode

  resistor element and glass.

• AEC-Q200 qualified.

Applications

• Power supply , ECU etc.

Features

• Superior to RK73 series in maximum working voltage.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not interded for Pb-glass contained in electrode, 

• resistor element and glass

Features:

• Superior to RK73 series in maximum working voltage.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements.EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• Suitable for high reliable applications like automotives. AECQ200 Tested.

Applications:

• Inverter, DC-DC converter, Battery Management, Charger, HID lamp

Reference Standards:

IEC 60115-8 

JIS C 5201-8

EIAJ RC-2134C

Features

• Superior to RK73 series chip resistors in surge withstanding voltage and pulse withstanding voltage.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified.

Applications

• E.C.U.

• Circuits to catch inductive lighting surge.

Features

• Superior to RK73 series chip resistors in surge withstanding voltage and pulse withstanding voltage.

• Resistance tolerance is available from ±0.5%.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified.

Applications

• E.C.U.

• Circuits to catch inductive lighting surge.

Features

• Superior to RK73 series chip resistors in pulse withstanding

• voltage and high power.

• Resistance tolerance is available from ±0.5％.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS

• requirements. EU-RoHS regulation is not intended for Pb-glass

• contained in electrode, resistor element and glass.

• AEC-Q200 qualified.

Features:

Metal-glaaze thick film resistor for surface mounting.

High precision resistor with T.C.R. ±25×10-6/K~ and tolerance ±0.1%~.

Suitable for both flow and reflow solderings.

Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

AEC-Q200 Qualified.

Applications:

Car electronics, Industrial equipment, Industrial measurement

Reference Standards:

IEC 60115-8

JIS C 5201-8

EIAJ RC-2134C

Features:

• Metal-glaze thick film resistor for surface mounting.

• High precision resistor with T.C.R. ±25×10－6/K～ and
  
  tolerance ±0.1%～.

• High reliability with ⊿R of ±0.2%～±0.5% in the Reliability test. 

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass
  
  contained in electrode, resistor element and glass. 

• AEC-Q200 Tested. 

  
  

Applications:

• Car electronics, Industrial equipment, Industrial measurement.

Features: 

• Flat chip resistors of wide terminal type.

• High reliability and performance with T.C.R.±100×10－6/K, resistance tolerance ±0.5%.

• Suitable for both reflow and flow solderings.

• Products meet EU-RoHS requirements.

    EU-RoHS regulation is not intended for Pb-glass contained inelectrode, resistor element and glass.

• AEC-Q200 Tested.

  
  

Applications: 

• Power supply, ECU etc.

Features:

• Higher power than conventional type.

• Flat chip resistors of wide terminal type.

• High reliability and performance with T.C.R.±100×10－6/K, resistance tolerance ±0.5%.

• Suitable for both reflow and flow solderings.

• Products meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Tested.

Applications

• Power supply, ECU etc.

Features:

• Superior to WK73 series in pulse withstanding voltage.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 Tested.

Applications:

• E.C.U

Features:

• High heat resistance that can be used even at high temperaturesof 155℃ or higher. The maximum operating temperature of Sn plating products compatible with solder mounting is 175℃, andAu plating products compatible with conductive glue mounting is 200℃.

• Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film.

• High stability and high reliability with the triple-layer structure of electrode.

• Superior to RK73 series chip resistors pulse withstanding voltage and high power.

• Applicable to various kinds of automatic mounters for taping, etc.

• Products meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Tested.

Features:

• Superior to RK73 series chip resistors in pulse withstanding voltage and high power.

• High Precision resistor with T.C.R. ±50×10－6/K and Tolerance ±0.25％.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Tested.

Applications:  

• Car electronics, Power supply, Industrial equipment.

Features

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Excellent heat resistance and weather resistance are ensured by the use of metal glaze thick film.

• High stability and high reliability with the triple-layer structure of electrode.

• Suitable for both flow and reflow solderings.

• This products meet EU-RoHS requirements. 

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified(Except 1F).

Applications

• Car electronics, Power supply, Industrial robot

Features

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Metal-glaze thick film resistor for surface mounting. 

• High precision resistor with T.C.R.± 50×10-6/K and tolerance ±0.5%

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements. 

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified

Applications

• Car electronics, power supply, industrial robot.

• Replacement of metal film chip resistors.

Features

• Anti-sulfuration flat chip resistors of wide terminal type.

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Suitable for both flow and reflow solderings.

• This products meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified.

Applications

• Car electronics, Power supplies, Industrial robots

Features

• Superior to RK73 series in maximum working voltage.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements. 

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

Applications

• Camera Strobe, LCD back-light, AC Adapters etc.

Reference Standards

• IEC60115-8

• JIS C 5201-8

• EIAJ RC-2134C

Features

• Superior to RK73 series in maximum working voltage.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements. 

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Suitable for high reliable applications like automotives. AEC-Q200 qualified.

Applications

• Inverter, DC-DC converter, Battery Management, Charger, HID Lamp

Reference Standards

• IEC60115-8

• JIS C 5201-8

• EIAJ RC-2134C

Features

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Superior to RK73 series chip resistors in surge withstanding voltage and pulse withstanding voltage.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified.

Applications

• Car electronics, Power supply, Industrial robot

Reference Standards

• IEC 60115-8

• JIS C 5201-8

• EIAJ RC-2134C

Features:

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Current detecting resistors for power supply, motor circuits, etc.

• High reliability and performance with resistance tolerance ±1.0％, T.C.R. ±100×10－6/K

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained inelectrode, resistor element and glass.

• AEC-Q200 Tested.

Applications:

• Car electronics, Power supply, Industrial robot

Features:

● Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

● Superior to RK73 series chip resistors in surge withstanding

voltage and high power.

● SG73S (for pulse) are able to select Resistance tolerance is available from ±0.5％.

● Suitable for both reflow and flow solderings.

● Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

● AEC-Q200 Tested.

Applications:

● Car electronics, Power supply, Industrial robot.

Features: 

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Metal-glaze thick film resistor for surface mounting.

• High precision resistor with T.C.R. ±25×10－6/K～ and tolerance ±0.1%～.

• High reliability with ⊿R of ±0.2%～±0.5% in the Reliability test.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained inelectrode, resistor element and glass.

• AEC-Q200 Tested.

Applications:

• Car electronics, Industrial equipment, Industrial measurement.

Features:

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• Superior to RK73 series chip resistors in surge withstanding voltage and pulse withstanding voltage.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Tested.

Applications

• Car electronics, Power supply, Industrial robot.

Features

• SMD metal film resistors.

• High precision type ±0.05% is also available as standard.

• High performance T.C.R. ±5×10-6/K is also available as standard.

• Low current noise.

• Suitable for control circuits in various industrial equipment.

• Suitable for both flow and reflow solderings.

• However, 1E type is available only for reflow soldering.

• Products with lead free termination meet EU-RoHS requirements.

Features

• SMD metal film resistors.

• High precision type ±0.05% is also available as standard.

• High performance T.C.R. ±5×10-6/K is also available as standard.

• Low current noise.

• Operating temperature range: up to 155°C.

• Rated ambient temperature : 85°C

• Improved moisture resistance by special protective coating.

• Suitable for control circuits in various industrial equipment.

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified.

Features:

• SMD metal film resistors.

• High precision type ±0.05％ is also available as standard.

• High performance T.C.R. ±5×10－6/K is also available as standard.

• Low current noise.

• Operating temperature range ～155℃.

  Rated ambient temperature: 85℃.

• High reliability with ΔR of ±0.1%～±0.25% in the long-term reliability test.

• Endurance at 85℃ (1,000h) : ΔR of ±0.1%

• Improved moisture resistance by high humidity protective coating.

• Suitable for control circuits in various industrial equipment.

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 Tested.

• Sulfur resistance verified according to ASTM B 809-95.

Applications:

• Automotive electronics

• Industrial equipment

• Measurement equipment

※For higher precision, RN73H series is available

Features:

・SMD metal film resistors of wide terminal type.

・High precision type ±0.1％ is also available as standard.

・High performance T.C.R. ±10×10⁻⁶/K is also available asstandard.

・Low current noise.

・Operating temperature range 〜155℃.

　Rated ambient temperature：85℃

・High reliability with ΔR of ±0.1% in the long-term reliability test.

・Endurance at 85℃ (1,000h) : ΔR of ±0.1%

・Improved moisture resistance by special protective coating.

・High precision resistor solution for tough environments,especially in high reliable automotive, medical and industrial applications.

・Suitable for both flow and reflow solderings.

・Products meet EU-RoHS requirements.

・AEC-Q200 Tested.

・Sulfur resistance verified according to ASTM B 809-95.

Applications:

・Automotive electronics (Power Train, Body Control)

・Industrial equipment

・Medical equipment

・Measurement equipment 

Features

• SHDR meet EU-RoHS requirements.

• Good frequency characteristics up to 15GHz:Reflection coefficient not more than -15dB (Representative value of SHDR001,50Ω)

• Wire-bonding form mounting.

• Most suitable for terminal resistors for high frequency circuits.

Applications

• Optical Modules of High Speed Large Volume Optical Communications, Microwave Integrated circuits.

Features

• RD41 is SMD carbon film resistors.

• Free direction for mounting due to cylindrical design.

• The electrode strength is firm.

• The noise characteristic is excellent.

• Suitable for reflow, flow and iron solderings.

• Products meet EU-RoHS requirement.

Features

• SMD metal film resistors.

• Free direction for mounting due to cylindrical design.

• High precision products (Resistance tolerance ±0.1% and T.C.R.±25×10-6/K) available.

• The electrode strength is firm.

• Suitable for reflow, flow and iron solderings.

• Products meet EU-RoHS requirement.

• AEC-Q200 qualified(RN41 2ES/3AS).

Features

• SMD cross-conductors.

• Free direction for mounting due to cylindrical design.

• Easy to form a cross pattern.

• The electrode strength is firm.

• Suitable for reflow, flow and iron solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified(CC12M/25).

Features:

• SMD type of small size, high rated current jumper.

• Low height suitable of use of Small equipment such as mobile phone.

• Suitable for reflow soldering. (Not suitable for flow soldering.)

• AEC-Q200 Tested.

• Products meet EU-RoHS requirements.

Applications:

• Mobile phones, PDAs, Media players, Computers etc.

Features

• General-purpose lead- type resistors.

• Automatic insertion is applicable.

• Various types of formings are available.

• Stronger in pulse resistance than chip resistors of the same power.

• The smaller type of 1/4W(CFS 1/4)is available.

• Products meet EU-RoHS requirements.

Features

• Equivalent to flame retardant coat.(UL94 V- 0)

• Automatic insertion is applicable.

• Stronger in pulse resistance than chip resistors of the same power.

• The smaller type of 1/4W (CFPS 1/4) is available.

• Products meets EU-RoHS requirements.

Features

• Small size power type resistors.

• Flame retardant coating. (Equivalent to UL94 V-0)

• Automatic insertion is applicable.

• Various types of formings are available.

• High reliability.

• Products meet EU-RoHS requirements.

• Automatic mounting machine is applicable by surface mounted device style lead forming.

Features

• General purpose power type resistors.

• Flame retardant coating. (Equivalent to UL94 V-0)

• Automatic insertion is applicable.

• Various types of formings are available.

• High reliability.

• Products meet EU-RoHS requirements

Features

• Small size power type resistors.

• Flame retardant coating. (Equivalent to UL94 V-0)

• Automatic insertion is applicable

• Various types of forming are available.

• High reliability.

• Excellent in pulse characteristic.

• Products meet EU-RoHS requirements.

• Automatic mounting machine is applicable by surface mounted device style lead forming.

Features

• High-power resistor.

• Using flame-retardant/insulated ceramic case.

• Excellent in anti-pulse and inrush current.

• Products meet EU-RoHS requirements.

  EU-RoHS regulation is not intended for Pb-glass contained in glass.

Features

• High precision and low T.C.R.metal film resistors.

• Automatic insertion is applicable.

• Various formings are available.

• Excellent stability for a long time.

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified(Except MF1/2).

Features

• High precision and low T.C.R. metal film resistor.

• Excellent stability for a long time.

• Products meet EU-RoHS requirements.

Standard Specification

• IEC 60115-1

• JIS C 5201-1

Features

• Flame retardant coating.

• Automatic insertion is applicable.

• Various types of formings are available.

• Products meet EU-RoHS requirements.

Features

• Flame retardant coating.

• Automatic insertion is applicable.

• Products meet EU-RoHS requirements.

Features

• Easily usable lead frame shape with wide resistance range.

• Super-high precision resistors with resistance tolerance±0.01% and ±2.5×10-6/K

• High density mounting available due to its plate shape and thinness (t=2.5mm Max.).

• Excellent in long-term stability.

• Products meet EU-RoHS requirements

Applications

• Thermo Controllers

• Medical Equipment

• Measuring Equipment

• Recorders

Features

• L-shaped, 2.54mm, 5.08mm and 7.62mm pitches between terminals make a high density mounting available.

• Optimal for compacting equipment due to its height of 5.5mm or under.

LF &LFF:

• Products meet EU-RoHS requirements.

• LFF is flame retardant coating(equivalent to UL94 V-0)

RK26:

• Available from100kΩ to 33MΩ

• Products meet EU-RoHS requirements. 

• EU-RoHS regulation is not intended for Pb-glass contained in resistor element.

Features

• High precision resistors with resistance tolerance ±0.1%,T.C.R . and ±5×10－6/K

• Excellent long term stability in resistance value.

• Automatic insertion is applicable.

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified(RNS1).

Standard Approved

• MIL-R-10509G standard (USA)

Features

• Super high precision resistors with a wide resistance range of 100Ω to 5.11MΩ　

  respond to tolerance ±0.01％ and T.C.R. ±5×10-6/K

• Extremely stable resistors with less variation ±0.01％/year.

• Designated resistances (marking in 4-digit effective figures) of tolerances ±0.01%～±0.25％ are available.

• Products meet EU-RoHS requirements

Features

• Products meet EU-RoHS requirements.

• CW1SS has UL1412 approval. (File No. E320246)

• Automatic mounting machine is applicable by surface mounted device style lead forming.

• Flame retardant coating(equivalent to UL94 V-0)

Features

• Resistors meeting MIL-PRF-26.

• High precision resistor with T.C.R.±20×10-6/K .

• Excellent stability for a long time.

• Products meet EU-RoHS requirements.

Features

• Resistors meeting MIL-R-26E (U and V characteristics) and surface temp. (hot spot) 350°C max.

• Resistors with a wide range of 0.1Ω - 62kΩ, covering applications from precision to power.

• RW□N type resistors are non-inductive wound and can be used in high frequency bands.

• Products meet EU-RoHS requirements.

Applications

• Inrush current preventitive resistors.

• Resistors for various power supplies such as instrumentations, communications, medical, etc.

• Resistors for semiconductor burn-in boards.

Features: 

• Flame retardant coating (Equivalent to UL94-V-0).

• Fail-safe mains fusing at AC 250V^※1

  _{※1 CWFS23 4.7Ω～9.1Ω：AC200V}

• Products meet EU-RoHS requirements

Approval Awarded: 

• UL1412 Recognized File No. E134679

Features

• Respondable to resistance tolerance ±1% and T.C.R. ±100×10-6/K.

• Resistors up to high resistance range in small sizes are available.

• Highly stable against environmental conditions and overload.

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in resistor element.

Approval Awarded

• UL1676 c-UL(CSA-C22.2 No.1-M94) (File No.E159326) recognized

Features

• Excellent anti- surge characteristics.

• Stable characteristics of moisture resistance up to high resistance range.

• RCR50＋（1MΩ～12MΩ）、RCR50EN（1MΩ～12MΩ）and RCR60（1MΩ～12MΩ）are conductive-path and 

• Discharge-path Resistors recognized by UL1676 and c-UL（CSA-C22.2 No.1-M94）.

• RCR25EN（100kΩ～33MΩ）, RCR50EN（100kΩ～33MΩ）and RCR60（100kΩ～56MΩ） is approved by EN60065 14.1 safety.

• Products meet EU-RoHS requirements.EU-RoHS regulation is not intended for Pb-glass contained in resistor element.

• Automatic mounting machine is applicable by surface mounted device style lead forming.

Applications

• TVs,CRT displays

• Copy machines

• LBPS

• VTRS

• Switching power supplies

• AC adapters

Features

• Miniature construction endurable to high voltage and high power.

• Resistors excellent in anti- surge characteristics.

• Wide resistance range of 500kΩ - 10GΩ and small T.C.R.

• Products meet EU-RoHS requirements.

  EU-RoHS regulation is not intended for Pb-glass contained in resistor element and Pb contained in Brass cap.

Features

• High resistance resistors for high voltage circuits.

• Thin SIP shape.

• The flame retardant coats corresponding to UL94V- 0 are used.

• Thick film resistors (RuO2) ensure high stabilies in life and change in aging.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications

• PPCs

• LBPs

• Air conditioners

• Microwave ovens

• High voltage circuits for fly- back transformers,etc.

Features

• KOA original ceramic resistors.

• Excellent in anti-pulse characteristics.

• Higher reliability against disconnection compared to wirewound resistors and film resistors.

• Products meet EU-RoHS requirements.

• Flame retardant coating.(Equivalent to UL-94 V-0)

• Non-Inductive resistors.

Applications

• High voltage circuits for X-ray generators and electron microscopes.

• Power supply circuits for machine tools, etc.

Features

• KOA original ceramic resistors.

• Excellent in anti-pulse characteristics.

• High reliability agaist disconnection compared to wirewound resistors and film resistors.

• Products meet EU-RoHS requirements.

• Non-Inductive resistors.

• AEC-Q200 Qualified.

Applications

• High voltage circuits for X-ray generators and electron microscopes.

• Flyback transformers.

• Power supply circuits for machine tools, etc.

Features

• Excellent noise prevention of engine ignition circuit system.

• Highly reliability against disconnection.

• Products meet EU-RoHS requirements.

Features

• PSN can respond to high voltage and high power with a wide resistance range of 500Ω - 6GΩ.

• PSO is made completely moisture preventive to be PSO that can be used under high moisture environment.

• PN is a non-inductive type and can be used for high frequency.

• PWW and PAP type are non-inductive wire wound resistors.

• PWW resistors have the same shapes as PSN and can be used for a low 

  resistance area that cannot be produced with PSN resistors.

• PAP resistors are non-inductive wire wound resistors with inductance 

  lessened than PWW can be used for pulse wave measurement, impulse generators, etc.

• Products with Pb free symbol“F”meet EU-RoHS requirement.

Applications

• Resistors for charging and discharging for high voltage, 

  resistors for surge absorption, and protective resistors at the time of a short- circuit.

• Voltage Equalizing Resistors at the time of using and connecting diodes and capacitors in series.

• Dividers for DC voltage and for measuring lightning and switching impulses.

Features:

• High-precision high voltage divider for high voltage circuits.

• Thin SIP shape.

• The flame retardant coats corresponding to UL94V-0 are used.

• Higher relative accuracy of resistance value is possible with one package.

• Thick film resistors (RuO2) ensure high stabilities in life and change in aging.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

  
  

Applications:

• PPCs and LBPs for power supply circuits

• High voltage power supplies of analyzing devices and medical equipment.

• High voltage detecting circuits for smart meters and power monitoring system.

Features:

・Resistors excellent in overload capability.

・Thin SIP shape.

・Thick film resistors (RuO₂) ensure high stabilities in life and change in aging.

・Meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications:

・Charging and discharge resistors for power supply circuits.

Reference Standards:

IEC 60115-1

JIS C 5201-1

Features

• Power type current detecting resistors.

• Flame retardant resistors in Ceramic Case.

• Automatic insertion for a 5mm pitch between terminals is applicable. (26type, 58type)

• Low inductance.

• Space saving.

• Products meet EU-RoHS requirements.

Features

• The super low resistance (3mΩ~) is suitable for high power current sensing.

• Pitches and heights adjustable according to mounting conditions.

• All custom-made products.

• Easy soldering.

• Products meet EU-RoHS requirements.

Features

• Zero OHM resistors of the same shape of CFS1/4 series and CF1/4 series.

• Automatic insertion is applicable.

• Products meet EU-RoHS requirements.

Features

• Automatic insertion is applicable.

• Higher than Z series in allowable current.

• Products meet EU-RoHS requirements.

Features

• Automatic insertion is applicable.

• Products meet EU-RoHS requirements.

Features

• Function as a resistor in normal condition.

• Quick fusing protects circuit from excessive overload at an abnormal time.

• Flame retardant coating. (Equivalent to UL94 V-0)

• Products meet EU-RoHS requirements.

Features

• Function as a resistor in normal condition.

• Quick fusing protects circuit from excessive overload.

• High density mounting and excellent self-standing strength with L-shape leads frame (lead pitch. 5.08mm).

• Flame retardant coating. (Equivalent to UL94 V-0)

• Products meet EU-RoHS requirements.

Features

• Fuse within 60sec in case of over-current.

• Constant current fusing type.

• Fuse at low magnification at 5 times or 10 times of power rating.

• Flame retardant coating. (Equivalent to UL94 V-0)

• Products meet EU-RoHS requirements.

Features

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not interded for Pb-glass contained in electrode, resistor element and glass.

• The wide resistance range and thermal cut-off temperature.

• A resistor with quick current break ability for cement resistor and thermal fuse.

Approval Awarded

• UL1412 Recognized 4.7Ω - 100Ω, File No.E134679

Features

• Quickly fusing to the overload.

• The circuit is completely isolated after fusing.

• Lightning surge test(IEC61000-4-5) effective.

• Can be used in high temperature.

Applications

• AC adapters

• Power supplies

• Lighting devices, etc.

Approvals awarded

• UL1412(File No.: E344400)

Features

• Ultra low resistance, suitable for large current sensing.

• Automatic mounting machines are applicable.

• Suitable for reflow soldering.(Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified.

Applications

• Current sensing for module of Automobiles , Inverter power supplies etc .

Reference Standards

• IEC 60115-1

• JIS C 5201-1

Features

• Correcter electric current detection is possible to 4-terminal Construction.

• Excellent T.C.R. achieved. (±50×10-6/K)

• Ultra low resistance, suitable for large current sensing.

• Automatic mounting machines are applicable.

• Suitable for reflow soldering.(Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified.

Applications

• Current sensing for module of Automobiles , Inverter power supplies etc.

Reference Standard

• IEC 60115-1

• JIS C 5201-1

Features

• Smooth current flow, suitable for large current sensing.

• Easy to absorb the thermal expansion , because of KOA's original terminal structure..

• Low height and suitable for use of thin modules.

• Automatic mounting machines are applicable.

• Suitable for reflow solderings.(Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified.

Applications

• Current sensing for module of Automobiles , Inverter power supplies etc.

Features

• Smooth current flow , suitable for large current sensing.

• Flat structure , applicable for strong mounting.

• Automatic mounting machines are applicable.

• Suitable for reflow solderings.(Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified.

Applications

• Current sensing for module of Automobiles , Inverter power supplies etc .

Features

• SMD type of small size, ultra-low resistance(5mΩ~) and high accuracy(±0.5％) resistor for current sensing

• Encapsulated with flame retardant resin molding. (UL94 V-0)

• Excellent dimension accuracy, mountability and shockresistance due to molded products.

• Excellent terminal strength and solderability due to structure of a metal plate terminal electrode.

• Easy to absorb the thermal expansion and shrinkage because of a metal plate terminal structure

• Suitable for flow, reflow and iron solderings.

• Products with lead free termination meet EU-RoHS requirements.

  EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 qualified.

Applications

• Automotive

• Note PCs

• Battery packs

• AC Adapters

• DC-DC converters

Reference Standards

• IEC 60115-1

• JIS C 5201-1

Features

• Ultra low resistances (0.5mΩ~), suitable for large current sensing.

• Ultra low height with a thickness of 0.6mm, 0.25mm(TLR1E), suitable for use of small equipment.

• Excellent high-frequency characteristics.

• Filletless products.(The soldering part of this product is only a bottom electrode.)

• Automatic mounting machines are applicable.

• Suitable for reflow soldering. (Not suitable for flow soldering. )

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified.

Applications

TLR(Small type):

• Mobile phones, PDAs, Media players, Computers, etc.

TLR:

• Current sensing for CPU

• Inverter power supplies

• DC-DC converters

• Mobile device etc.

Features

• Ultra low resistances (0.5mΩ~), suitable for large current sensing.

• Ultra low height with a thickness of 0.6mm, suitable for use of small equipment.

• Excellent high-frequency characteristics.

• Filletless products. (The soldering part of this product is only a bottom electrode.)

• Automatic mounting machines are applicable.

• Suitable for reflow soldering. (Not suitable for flow soldering).

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified.

Applications

• Current sensing for CPU

• Inverter power supplies

• DC-DC converters

• Mobile devices

Reference Standard

• IEC 60115-1

• JIS C 5201-1

Features

• SMD Type of small size, low resistance resistor for current detection.

• Carrier metal plate inside, resistor of high radiation of heat structure. (3AW/3AP)

• High reliability and performance with Low T.C.R.

• Automatic mounting machines are applicable.

• Suitable for reflow soldering.(Not suitable for flow soldering)

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified.

Applications

• Inverter power supplies

• Motor control

• Mobile PC

Features:

• SMD type of small size, ultra-low resistance (3mΩ～) and high accuracy (±0.5% resistor for current sensing.

• Encapsulated with flame retardant resin molding. (UL94 V0)

• Excellent dimension accuracy, mountability and shock-resistance due to molded products.

• Excellent terminal strength and solderability due to structure of a metal plate terminal electrode.

• Easy to absorb the thermal expansion and shrinkage because of a metal plate terminal structure.

• Suitable for flow, reflow and iron solderings.

• Products with lead free termination meet EU-RoHS requirements. EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified.

Applications:

• Automotive

• Note PCs

• Battery packs

• AC Adapters

• DC-DC converters, etc.

Features

• Current sensing chip resistors of 4-terminal construction with current terminals and voltage (KELVIN) terminals.

• Despite ultra low resistance, high resistance accuracy is realized.

• No change in resistance value after soldering to a circuit board, even for D (±0.5%) or F (±1.0%) class.

• Excellent T.C.R. achieved(±50×10-6/K)

• Flame retardant type resin is used. (UL94 V-0)

• Suitable for reflow, flow and iron solderings.

• Products with lead free termination meet EU-RoHS requirements.

Applications

• Electric automobiles

• Industrial robots

Features:

• Suitable to sense large current due to ultra low resistances.

• Flame retardant resistor in a ceramic case.

• All custom-made products.

• Automatic mounting is available.

• Products meets EU-RoHS requirements.

Features

• The super low resistance (2mΩ - )is suitable to sense large current.

• All custom-made products.

• Easy soldering. Applicable for reflow soldering.

• An automatic mounting machine is applicable.

• Products with lead free termination meet EU-RoHS requirements.

Features:

• SMD type of small size, metal plate low resistance resistor for current detection.

• Low height suitable for use of Small equipment such as mobile phone.

• High reliability and performance with T.C.R ±100×10−6/K

• Suitable for reflow soldering. (Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 Tested.

Applications:

• Mobile phones, PDAs, Media players, Computers etc.

Features:

• Ultra low resistance, suitable for large current sensing.

• Automatic mounting machines are applicable. 

• Suitable for reflow soldering. (Not suitable for flow.
  
  soldering.) 

• Products meet EU-RoHS requirements. 

• AEC-Q200 Tested.

  
  

Applications:

• Current sensing for module of Automobiles, Inverter power supplies etc.

Features:

• Ultra low resistances (0.5mΩ〜), suitable for large current sensing. 

• Ultra low height with a thickness of 0.6mm, suitable for use of small equipment.

• Excellent high-frequency characteristics.

• Automatic mounting machines are applicable.

• Suitable for reflow soldering. (Not suitable for flow soldering)

• Products meet EU-RoHS requirements.

• AEC-Q200 Tested.

  
  

  
  

Applications:

• Current sensing for CPU

• Inverter power supplies

• DC-DC converters

• Mobile device etc.

  
  

Reference Standards

• IEC 60115-1

• JIS C 5201-1

  
  

Features:

• Correcter electric current detection is possible to 4-terminal Construction.

• Excellent T.C.R. achieved (±50×10−6/K)

• Ultra low resistance, suitable for large current sensing.

• Automatic mounting machines are applicable.

• Suitable for reflow soldering. (Not suitable for flow soldering.)

• Products meet EU-RoHS requirements.

• AEC-Q200 Tested.

  
  

Applications:

• Current sensing for module of Automobiles, Inverter power supplies etc.

  
  

Reference Standards:

• IEC 60115-1

• JIS C 5201-1

Features

• Flat chip resistors of wide terminal type.

• High reliability and performance with T.C.R.±100×10-6/K, resistance tolerance.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements. 

  EU-RoHS regulation is not intended for Pb-glass contained in Electrode, resistor element and glass.

• AEC-Q200 qualified.

Applications

• Power supply, ECU etc.

Reference Standard

• IEC 60115-8

• JIS C 5201-8

• EIAJ RC-2134C

Features

• Current detecting resistors for power supply, motor circuits, etc.

• High reliability and performance with resistance tolerance 0.5%, T.C.R. ±100×10-6/K.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified(Except 1H).

Applications

• Car Electronics, Computers, HDDs, Cellular-telephones, Power supplies, and Motor circuits, etc.

Features

• Current detecting resistors for power supplies, motor circuits, etc.

• Low resistance (100mΩ or under) and high accuracy resistors (±1%) for current detection.

• High reliability and performance with T.C.R. ±100×10-6/K.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements.

Applications

• Computers, HDDs, Cellular-telephones, Power supplies, and Motor circuits, etc.

Features

• Current detecting resistors for power supplies, motor circuits, etc.

• Low resistance(100mΩ or under) and high accuracy resistors(±1%) for current detection.

• High reliability and performance with T.C.R. ±75×10-6/K.

• Suitable for flow and reflow solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 qualified.

• Operating temperature range up to 155°C

Applications

• Module of Automobiles, Computers, HDDs, Cellular-telephones, Power supplies, and Motor circuits, etc.

Features

• Stable in life and change with the passage of time with metal glaze resistors(RuO2).

• Free from short circuit, unexpected solder melting and terminal 

  disconnection due to the high temp. solder used to connect terminals.

• Capable of reducing the numbers of parts and part insertions.

• Custom orders are available.

• Products with lead free termiration meet EU-RoHS requirements. 

  EU-RoHS requlation is not intended for Pb - glass contained in electrode , resistor element and glass .

Features

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Higher self-alignment effect in reflow-soldering process.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications

• Resistors for Damping, Pull-up/Pull-down, Termination for digital circuits.

• LED current limiting.

Features

• Excellent anti-sulfuration characteristic due to using high sulfuration-proof inner top electrode material.

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Easy soldering fillet inspection.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for reflow soldering.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pbglass contained in electrode, resistor element and glass.

Applications

• Resistors for Pull-up/Pull-down resistor for digital circuits.

Features

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• 2, 4 and 8 elements of SMD resistor arrays are available.

• Precision type ±1% is available.

• Higher self-alignment effect in reflow-soldering process.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for both reflow and flow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified(CN1J4)

Applications

• Resistors for Damping, Pull-up/Pull-down, Termination for digital circuits.

• LED current limiting.

• Terminals for SDRAM, DRDRAM. (1 - 10Ω, 5% available)

Features

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Easy soldering fillet inspection.

• 2, 4 and 8 elements of SMD resistor arrays are available.

• Precision type ±1% is available.

• Suitable for an image recognition mounter due to square corner design. (CN-K type)

• Suitable for both flow and reflow soldering.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

• AEC-Q200 Qualified (CN1E4K, CN1J4A, CN1J4K).

Applications

• Resistors for Pull-up/Pull-down resistor for digital circuits.

Features

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Higher self-alignment effect in reflow-soldering process.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for both reflow and flow solderings.

• Integrated 8 elements for Pull-up/Pull-down.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications

• Resistors for Pull-up/Pull-down for digital circuits.

Features

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Easy soldering fillet inspection.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for both flow and reflow soldering.

• Integrated 8 elements for Pull-up/Pull-down.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications

• Resistors for Pull-up/Pull-down for digital circuits

Features

• More advancement in the mounting density than individual chip resistors.

• Mounting cost reduction by decreasing the number of parts mounting times.

• Higher self-alignment effect in reflow-soldering process.

• Suitable for an image recognition mounter due to square corner design.

• Suitable for both reflow and flow solderings.

• 4 or 8 elements are integrated for Pull-up/ Pull-down.

• Easy to make a PWB layout with a zigzag electrode.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.

Applications

• Resistors for Pull-up/Pull-down for digital circuits

Features

• This BGA packaging resistor network device virtually eliminates channel capacitance, a primary cause of reduced system performance.

• This device eases routing design of DDR SDRAM termination.

• Higher integration of resistor elements saves overall assembly costs.

• Lead free terminal.

• High precision ±1% is standard.

• BGA packaging is effective in a saving of the board space and high density mounting.

• Products meet EU-RoHS requirements. EU-RoHS reguation is not intended for Pb-glass contained in electrode, resistor and glass.

Features

• Metal film chip network resistors.

• Excellent in relative T.C.R. and relative accuracy.

• Pair resistors for high precision OP-Amplifiers.

• As custom products, any pairs between 1kΩ and 100kΩ are available on request.

• Suitable for reflow soldering.

• Products with lead free termination meet EU-RoHS requirements.

Features:

・ High precision high voltage divider.

・ Max. resistance value 51MΩ, Max. working voltage 1000V, Max. resistance ratio 1000:1.

・ Relative precision of pair resistors are guaranteed.

・ Higher integration saves board space and overall assembly costs.

・ Excellent reliability with Standard molded IC package.

・ Suitable for reflow soldering.

・ Products meet EU-RoHS requirements.

・ AEC-Q200 Tested.

Applications:

・ High voltage divider for HEV/EV.

・ High magnification of the operational amplifier circuit.

Features

• The same automatic mounter for semiconductors can be used.

• Max. 15 resistor elements can be built in with a 1.27mm terminal pitch.

• Low profile : 2.2mm or lower.

• Suitable for both reflow and flow solderings.

• Improved mechanical strength and reliability by molding structure.

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not interded for Pb-glass contained in electrode, resistor element and glass. 

  The solder, which is not applicable to EU-RoHS, is also used for an inner connection.

Applications

• Damping resistors and pullup/pulldown resistors for digital circuits

Features

• Thin film (metal film) Resistor array on silicon wafer.

• Excellent resistance matching, TCR tracking and stabilities.

• Custom circuits are available with flexible layout. (Different resistance combination possible)

• Higher integration saves board space and overall assembly costs.

• Excellent reliability with standard molded IC package.

• Suitable for reflow soldering.

• Products with lead free termination meet EU-RoHS requirements.

Features    RIA • RNX

• High precision resistor networks

• Combination of different resistance is available for custom circuit.

• Relative resistance tolerance 0.05%

• TCR tracking5×10−6/K

Features  RTY

• Expanded flexibility of component layout.

• Relative precision of pair resistors are guaranteed.

• Relative resistance tolerance 0.05%

• T.C.R. tracking5×10−6/K

Application

• Making peripheral resistors for analog operational amplifiers highly accurate 1 chip network.

• Automotives, Analog instrumentations, IC testers

• Computers, Data communications, Network systems

• Operational amplifiers, Terminations, Pull-up/Pull-down

Application  RIA • RNX

• Automotives, medical instrument, industrial machines, Measurement equipment

• Computers and networks

• High precision OP amp circuit, High precision voltage divider

Application  RTY

• Voltage dividing circuit

• Reference voltage circuit

• OP amplifier circuit

• Matching resistors

Features

• Relative resistance tolerance 0.025% is available.

• Relative T.C.R. tracking 2×10-6/K is available.

• Excellent in stability and electrical characteristics.

• Products meet EU-RoHS requirements

Applications

• Thermo Controllers, Oscilloscopes, Recorders, Medical Equipment

Features

• Various types of standard circuits in different sizes and power are available. (Seated height 5.08mm,6.5mm,10.7mm Max.)

• For automatic insertion machines, stick magazines (the tip of lead terminal is cut to a V shape) and

   taping packages (TBA: All leads taping, TPA, TUA: 3 leads taping) are applicable.

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass

Features

• 1005 size miniature and light chip current fuses for the secondary circuit. An occupied area reducible.

• Excellent in mechanical strength.

• The original construction and manufacturing method make the fusing characteristics stable.

• Low power consumption and less voltage dropping possible due to low internal resistance.

• Suitable for over current protection of circuit block in small electronic devices.

• Suitable for both reflow and flow soldering.

• Products meet RoHS requirements.

Approvals Awarded

• UL248.14 (Under application)

• c-UL(CSA)C22.2 No.248.14 (Under application)

Applications

• Cellular-telephones

• Digital still cameras

• Notebook personal computers

Features

• Small and light chip current fuses for the secondary circuit.

• The original manufacturing method makes the fusing characteristics stable.

• Able to reduce an occupied area.

• Low power consumption and less voltage dropping due to low internal resistance.

• Suitable for over current protection of circuit block in small electronic devices

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements.

Approvals Awarded

• UL248.14 File No.E131375

• c-UL(CSA)C22.2 No. 248.14 File No.E131375

Applications

• Notebook personal computers

• HDDs

• Mobile phones

• Digital still cameras

Features

• Small and light chip current fuses for the secondary circuit.

• Temperature cycle (-55°C ~ ＋125°C), 1000cycles.

• Original construction and manufacturing method stabilize fusing characteristics.

• Suitable for overcurrent protection of circuit block in small electronic devices.

• Suitable for reflow soldering.

• Products meet EU-RoHS requirements

Applications

• Protection from overcurrent to electronic device for automotive.

Features

• Small and light chip current fuses for the secondary circuit.

• Excellent in anti-pulse characteristics.

• Original construction and manufacturing method stabilize fusing characteristics.

• Able to reduce an occupied area.

• Low power consumption and less voltage dropping due to exceedingly low internal resistance.

• Suitable for overcurrent protection of circuit block in small electronic devices.

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements

Approval Awarded

• UL248.14 File No. E131375

• c-UL（CSA）C22.2 No. 248.14　 File No. E131375

Applications

• Notebook personal computers

• HDDs

• Cellular-telephones

• Digital still cameras

Features

• Surface mounting fuses suitable for primary and secondary circuits.

• Excellent mechanical strength with ceramic body.

• Stable fusing characteristics due to the original technology.

• Excellent Anti-Surge characteristics.

• Suitable for reflow and flow soldering.

• Products with lead free termination meet EU-RoHS requirements.

Approvals Awarded

• PSE(1 ～10A)Class B

• UL248.14 File No.E171861(250mA ～15A)

• c-UL(CSA)C22.2 No.248.14 File No.E171861(250mA ～15A)

Applications

• Power supplies for note PCs

• Power supplies for LCD inverters

• Power supplies for Illumination inverters

• Copying machine, Laser beam printers

• Industrial equipment

Features

• Excellent anti-sulfuration characteristic. (4A or less)

• Meets IEC60127-4 specifications.(7A or less)

• Stable fusing characteristics due to the original technology.

• Suitable for reflow and flow soldering.

• Products meet EU-RoHS requirements.

Approvals Awarded

• UL248.14 File No.E171861

• c-UL(CSA)C22.2 No.248.14 File No.E171861

Reference Standard

• IEC60127-4 Universal modular fuse-Links

• Standard sheet2

Applications

• Power supplies for illumination inverters

• Copying machines, Laser beam printers

• Industrial equipment

Features

• SMD type metal oxide varistors.

• Ideal for the countermeasure against ESD. 

• AEC-Q200 qualified.

• Symmetrical non-linearity V-I characteristics absorb positive and negative surge.

• High maximum energy type.

• Operating temperatures up to 125°C

• Low leakage current.

• High resistance to cyclic temperature stress.

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements.

   EU-RoHS regulation is not intended for Pb-glass contained in electrode, varistor element and glass.

Applications

• Protection from surge to electronic device for automotive.

• Absorption of surge voltages occurred from inductive load of motors, relays,etc.

• Protection of semiconductor elements against over voltages.

Features

• Symmetrical non-linearity V-I characteristics absorb positive and negative surge.

• Suitable for the protection from load dump surge on the electronic components for automotive.

• Meet for load dump surge test of JASO.

• Operating temperatures up to 125°C.

• High resistance to cyclic temperature stress.

• Suitable for both flow and reflow solderings.

• Products meet EU-RoHS requirements.

• AEC-Q200 Qualified.

Appliation

• Protection from surge to electronic device for automotive.

• Absorption of surge voltages occurred from inductive load of motors, relays, etc.

• Protection of semiconductor elements against over voltages.

Features

• SMD type metal oxide varistors (0402・0201 inch size).

• Ideal for countermeasures against ESD with excellent responsivity (Conforming to IEC61000-4-2).

• 3pF available.

• Pb-free solder on terminal section.

• Two-way noise can be absorbed.

• Suitable for reflow soldering.

• Products meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, varistor element and glass.

Applications

• Cellular-telephones, DSCs, Computers, PDAs, I/O, etc.

Features

• Varistors own two-way symmetries and can absorb positive and negative surges.

• Multilayer construction allows its small size to absorb a large surge.

• Small space and high density mounting available due to the small package.

• Suitable for both flow and reflow solderings.

• Products with lead free termination meet EU-RoHS requirements.

• EU-RoHS regulation is not intended for Pb-glass contained in electrode, varistor element and glass.

Applications

• Protection of ESD from input and output terminals of mobile devices.

• Absorption of surge voltages occurred from inductive load of motors, relays, etc.

• Protection of semiconductor elements against over voltages.

• Absorption of surge voltages generated from piezoelectric elements.

Multilayer Type Metal Oxide Varistors NV73S2E·NV73S2J·NV73S2L

■Features

・ Varistors own two-way symmetries and can absorb positive

and negative surges.

・ Multilayer construction allows its small size to absorb a

large surge.

・ Small space and high density mounting available due to the

small package.

・ Suitable for both flow and reflow solderings.

・ Products meet EU-RoHS requirements.

■Applications

・ Protection of ESD from input and output terminals of

mobile devices.

・ Absorption of surge voltages occurred from inductive load

of motors, relays, etc.

・ Protection of semiconductor elements against over voltages.

・ Absorption of surge voltages generated from piezoelectric

elements.

Features

• Varistors own two-way symmetries and can absorb positive and negative surges.

• Flame retardant epoxy resign (UL94V-0) is employed for the outer coating.

• The max peak current has developed about 2 times and the max.energy about 1.5 times in comparison with the existing products.

• Products with lead free inner connect solder meet EU-RoHS requirements .

Applications

• Measures for inductive lightning surges of those equipment that are connected to d.c.and a.c.lines.

• Absorption of surge voltages from inductive load of motors,relays,etc. and protection of semiconductor elements from excessive voltages.

Approval Awarded and Coverage

• UL1449(File No. E328032)

• NVD05, NVD07: 82 to 1100V, NVD14: 82 to 910V, NVD20: 200 to 910V

Applications

• Measures for inductive lightning surges of those equipment that are connected to d.c. and a.c. lines.

• Absorption of surge voltages from inductive load of motors, relays, etc.and protection of semiconductor elements from excessive voltages.

Features

• Varistors own two-way symmetries and can absorb positive and negative surges.

• Flame retardant SILICONE (UL94V-0) is employed for the outer coating.

• Products meet EU-RoHS requirements.

Approvals Awarded and Coverage

• UL1449(File No. E328032)

• Ask us for c-UL or VDE approved products.

FeaturesFeatures

• Surge absorber elements in discharge tube with a microgap.

• The small size does not take up so much space on boards

• No need to distinguish polarity.

• Quick response to surge voltage.

• Stable against repeated surges.

• Available for high frequency circuits due to the low-electrostatic capacitance.Products meet EU-RoHS requirements.

Applications

• Internal electrostatic discharge protection for CRT displays,etc.

• Electrostatic discharge protection for antenna lines.

What is LTCC?

LTCC stands for Low Temperature Co-fired Ceramics.

KOA’s LTCC are multilayer ceramic substrates. This technology permits to use low resistive

 material as conductor patterns due to the lower temperature needed during firing process 

compared to general ceramic firing process. This is achieved by adding glass to alumina. 

KOA uses Silver based paste (Ag) to create the electrical structures in and on the ceramics layers. 

To be noted, that top and bottom layers patterns can be platted using various processes.

Thanks to these materials, low loss electrical performance can be achieved as well as high dimensional accuracy.

KOA’s LTCC provides clear advantages for system downsizing by forming surface resistors, 

inner resistors, and transmission lines on in the substrate. In addition, our thermal expansion coefficient is close to silicon’s one,

 enhancing the reliability of mounted bare chip.Furthermore, cavity structures can be formed,

 making possible the creation of low profile packages.

Features

• KOA’s substrates are suitable for bare chip mounting, as the thermal expansion cofficient is

   close to silicon’s one and outstanding dimensional accuracy and flatness.

• Thanks to our low dielectric ceramics and low resistive conductors, the substrates excel in 

  the high frequency characteristics

• Minituarization and high integration are possible because of multiayer wiring, multi-cavity

   structure and the surface/buried printing resistors possibilities

• Special shapes of substrate and cavity such as circle shape, polygonal shape and

   concave or convex shape are available.

• Thermal vias under bare chips can be implemented to improve the thermal conductivity of the substrate.

• The substrates are outstanding in heat resistance and humidity resistance.

  There will be no outgas occurrence from the ceramics.

• Products meet EU-RoHS requirements.

Applications

• Applications running at high frequencies like micro-waves, milli-waves, etc.

• Applications used in harsh environment, especially in high temperatures, high humidities, etc.

• Various sensor packages.

• Multi chip modules for bare chips.

• MEMS packages.

• Interposer substrates.

Applications

• Automotives applications (ECU, Power Windows)

• Power supply devices (DC/DC converters,AC/DC converters, Stabilizer, Lithium ion battery charger circuit) 

• Industry devices (control circuits),

• Telecommunication equipment (Telephone switchboard, LAN, Transceivers, VCO, VTXO)

Features

• Adjustment processes are decreased by function and ratio trimmings.

• High density mounting by bonding (COB).

• Various types of package are available.

• High reliability achieved by KOA's original thick film technology.

EU-RoHS requirements

• Each constructional element of thick film printed circuit substrate and 

  printed board has optimized material. Inner connecting solder is lead-free.

Features

• Plural semiconductors in one package offers downsized system with high performance and standardization.

• Wiring space saving by multilayer fine patterns on build-up substrate. No signal delay by shortened wiring distance

• High precision modules by function trimming.

• Less mounting problem because of the decreasing number of the terminals

Features:

·Surface-mountable chip type check terminals.

·Automatic mounting can be done by an ordinary chip mounter.

·Inch size code 1206, 0805 and 0603 are available.
(for size 1206, two kinds of the height 1.25mm and 2mm are provided.)
·Suitable for both flow and reflow solderings.

·Since only the outside surface is solder-plated, the inside is structured unsolderable.

·Products meet EU-RoHS requirements.

·AEC-Q200 qualified (RCU).

Applications:

·Terminals for checking signals from a P.C. board when adjusting and repairing the set.

Number of Turns：Single turn

Resistance Value：100Ω~1MΩ

Power Rating：0.1W(70℃), 0W(125℃)

Setting Position：Top

Surface Mounting：Yes

Shape of Terminal：J-hook

Sealing Properties：Washable (Sealed Construction)

Number of Turns：Single turn

Resistance Value：10Ω~2MΩ

Power Rating：0.125W(70℃), 0W(125℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：Single turn

Resistance Value：10Ω~2MΩ

Power Rating：0.25W(70℃), 0W(125℃)

Setting Position：Top, Side, Rear

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing, Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns：14 turns

Resistance Value：10Ω~2MΩ

Power Rating：0.25W(85℃), 0W(120℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：3 turns

Resistance Value：50Ω~1MΩ

Power Rating：0.25W(70℃), 0W(125℃)

Setting Position：Top

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：11 turns

Resistance Value：50Ω~ 2 MΩ

Power Rating：0.125 W(70 ℃), 0 W(150 ℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：5 turns

Resistance Value：50Ω ~ 2MΩ

Power Rating：0.125 W(70 ℃), 0 W(150 ℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：11 turns

Resistance Value：10Ω ~ 2MΩ;

Power Rating：0.25 W(85 ℃), 0 W(150 ℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：5 turns

Resistance Value：10Ω~ 2MΩ

Power Rating：0.25 W(85 ℃), 0 W(150 ℃)

Setting Position：Top, Side

Surface Mounting：Yes

Shape of Terminal：J-hook, Gull wing

Sealing Properties：Washable (Sealed Construction)

Number of Turns：Single turn

Resistance Value：10Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns：Single turn

Resistance Value：10Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns: Single turn

Resistance Value: 10Ω~5MΩ

Power Rating: 0.5W(70℃), 0W(120℃)

Setting Position: Top, Side, Rear

Shape of Terminal: Through hole

Sealing Properties :Washable (Sealed Construction)

Number of Turns: Single turn

Resistance Value:10Ω~5MΩ

Power Rating: 0.75W(70℃), 0W(120℃)

Setting Position: Top, Side (With knob available)

Shape of Terminal: Through hole

Sealing Properties: Washable (Sealed Construction)

Remarks: Panel mount type available

Number of Turns：3 turns

Resistance Value：50Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns：14 turns

Resistance Value：10Ω~2MΩ

Power Rating：0.25W(85℃), 0W(120℃)

Setting Position：Top, Side

Shape of terminal: Through hole

Sealing Properties: Washable (Sealed Construction)

Number of Turns：15 turns

Resistance Value：10Ω~5MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Remarks：Panel mount type available

Number of Turns：18 turns

Resistance Value：10Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns：Single turn

Resistance Value：10Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)

Number of Turns：18 turns

Resistance Value：10Ω~2MΩ

Power Rating：0.5W(70℃), 0W(120℃)

Setting Position：Top, Side

Shape of Terminal：Through hole

Sealing Properties：Washable (Sealed Construction)