Home > Product Center > Products > Passive devices
Passive devices | Thermistors,Thermal Sensors
Platinum Thin Film Thermal Sensors

 c_sdt73h_s (1).pdf

Platinum Thin Film Thermal Chip Sensors SDT73H • SDT73S

Features

  • SMD platinum thin film thermal sensors.

  • T.C.R. is equivalent to JIS•IEC standards.

  • Suitable for temperature control in various industrial equipment.

  • Suitable for both flow and reflow solderings.

  • Products meet EU-RoHS requirements.

Applications

  • Temperature compensation for various kinds of sensor drive circuits.

  • Temperature compensation for telecommunication, measuring and medical equipment.

  • Temperature compensation for ICs. 

Reference Standards

  • IEC 60751-1995 JIS C 1604-1997


 SDT73V.pdf

Platinum Thin Film Thermal Chip Sensors(For Automotive) SDT73V

Features

  • SMD platinum thin film thermal sensors for automotive.

  • T.C.R. is equivalent to JIS•IEC standards.AEC-Q200 qualified.

  • Suitable for both flow and reflow solderings.

  • Products meet EU-RoHS requirements.

Applications

  • Temperature compensation of the electronic component for automotive.

  • Temperature compensation for various kinds of sensor drive circuits.

  • Temperature compensation for telecommunication and measuring equipment.

Reference Standards

  • IEC 60751-1995 JIS C 1604-1997


 sdt101.pdf

 sdt101.pdf

Platinum Thin Film Thermal Sensors SDT101A/B/AB

Features:

・ SDT101SA is ultra-compact sensor element and offers 1kΩ.

・ Simple structure for lead forming.

・ SDT101A and SDT101SA can be easily soldered.

・ Ideal for low directivity heat flow sensor elements.

・ AEC-Q200 Tested. (SDT101B 500Ω, SDT101SA)

・ Products meet EU-RoHS requirements.


Applications:

・ Temperature compensation of load cells for Electronic Weighing Instruments.

・Detections of outer air and cooling water temperatures and filter clogging of Air Conditioners.

・ Measurement of flow rate of electronic fuel injection systems, correction of intake air temperature of Automobiles.

  Contact our sales representatives before you use the products for automotives.

・ Cold point compensation and temperature detection probe of Thermocouple Temperature Controllers.

・ Temperature compensations of various kinds of Measuring Instruments and Analyzers, Hot wires of Anemeters.


 sdt310hctp.pdf

Small Type Platinum Thin Film Thermal Sensors(Narrow) SDT310HCTP

Features

  • Characteristics are quivalent to IEC 60751-2008•JIS C 1604-2013

  • The small package(1.2m×3mm) with a real ability of 100Ω resistance.

  • RoHS compliant. RoHS regulation is not intended for Pb-glass contained in glass.

 

Applications

  • Cold point compensation for thermocouple temperature controllers and temperature detection probe.

  • Temperature compensation and revision for RF circuit of telecommunication equipment.

 

Reference standards

  • IEC 60751-2008

  • JISC 1604-2013


 sdt310.pdf

Small Type Platinum Thin Film Thermal Sensors SDT310

Features

  • T.C.R.is equivalent to JIS•IEC standards.

  • The small package with a real ability of 1kΩ resistance.

  • Thermal time constant is improved with the small package.

  • Products meet EU-RoHS requirements.

  • EU-RoHS regulation is not intended for Pb-glass contained in glass.

 

Applications

  • Cold Point compensation and temperature detection probe for thermocouple temperature controllers.

  • Hot wires and temperature compensation of anemometers.

  • Temperature compensation and revision for RF circuit of telecommunication equipment.


 st.pdf

Thermal Sensors ST

Features

  • All ST-series thermal sensors are custom-made products.

    ST-series thermal sensors are designed in various shapes in 

    accordance with your application using a platinum thin-film 

    thermal sensor(SDT101•SDT310series) as an element.

    Shapes of sensor parts can be designed flexibly to mee

    your shapes and dimensional needs,from simple resin

    mold parts to sensor parts sealed in metal protective tubes made of SUS316.

  • Products with Pb Free symbol "F" meet EU-RoHS requirements.

Applications

  • Industrial Equipment :

     Environment testing machines, Constant-temperature ovens, pH meters, temperature controllers, mass flow meters ,etc .

  • Industrial Equipment :

     Environment testing machines, Constant-temperature ovens, pH meters, temperature controllers, mass flow meters ,etc .

  • Automotive : Please ask us for details.


 afs.pdf

Air Flow Sensor Units AFS

Features

  • The platinum thin-film thermal sensor realizes high and long- term stability.

  • The small platinum thin-film thermal sensor and an even temperature differential operating circuit ensure a quick response.

  • The built-in temperature compensation circuit assures correct values regardless of air temperature.

  • The air velocity sensor and air velocity temperature compensation sensor are sensors

     with the same characteristics to enable correct temperature compensation.

  • Products have no rotating mechanism and are resistant to vibration.

Applications

  • Air flow control of hot water boilers.

  • Air flow control of air conditioning systems for buildings.

  • Air flow control and stoppage detection of fan mortors.

  • Air flow control of clean rooms and clean benches .

  • Air velocity and air flow control of environmental equipment and apparatuses.

  • Detection of clogging of filters.


 sdt310vasp2.pdf

Small type Platinum Thin Film Thermal Sensors SDT310VASP2

Features:

・ Achieves a thermal time constant of 2.8-seconds due to volume  reduction.

・ Excellent heat-resistance.

・ Applies axial lead type suitable to use as heater element.

・ AEC-Q200 Tested. 

・ Products meet EU-RoHS requirements. 


Applications:

・ Heater elements for thermal flowmeters of Industrial equipment,  measuring instruments and automotive.

・ Ultra-small thermal sensor of industrial equipment and measuring  instrument.


Reference Standards

IEC 60751-2008

JIS C 1604-201

Linear P.T.C. Resistors/Thin film

 lt.pdf

Linear Positive Temp. Coefficient Resistors LT

Features

  • Suitable for temperature control in various industrial equipment.

  • Various types of formings are available.

  • Products meet EU-RoHS requirements.

 

Reference Standards

  • EIAJ RC-2135


 lp73.pdf

Thin Film Resistance Thermal Chip Sensors LP73

Features 

  • LP73s are thin-film thermal sensors of SMD type.

  • LP73s accomodate resistance tolerance 1%, wide range of TCRs,+3000×10-6/K ~ +5000×10-6/K with the standard products.

  • Suitable for control of temperatures in various industrial equipment.

  • Suitable for both flow and reflow solderings.

  • Products with lead free termination meet EU-RoHS requirements.


Applications 

  • Temperature compensation on overheat prevention for FDDs, Cameras and Small DC Motors.

  • Temperature compensation for various kinds of Sensor Drive Circuits.

  • Temperature compensation for Telecommunication and Measuring Devices.

  • Temperature compensation for Hybrid ICs.


 lt73.pdf

Linear Positive Temp. Coefficient Flat Chip Resistors LT73

Features

  • SMD thin film resistors with thermo-perceptivity.

  • Various T.C.R.s +150 to +4500×10-6/K are available.

  • Suitable for both flow and reflow solderings.

  • Products with lead free termination meet EU-RoHS requirements.

 

Application

  • Suitable for temperature control in various industrial equipment.


 lt73v.pdf

Linear Positive Temp. Coefficient Flat Chip Resistors (For Automotive) LT73V

Features

  • SMD thin film resistors with thermo-perceptivity.

  • Various TCRs +150~+4500×10-6/K are available.

  • Operating temperature range ~155°C. Rated ambient temperature: 85°C

  • AEC-Q200 qualified.

  • Suitable for both flow and reflow soldering.

  • Products meet EU-RoHS reguirements.

 

Application

  • Temperature compensation of current sensor, FET and semiconductor.

  • Temperature compensation for various kinds of electronic circuits and sensor.


 mlt.pdf

MELF Type Linear Positive Temp.Coefficient Resistor MLT

Features

  • SMD style linear positive temp. metal film resistors.

  • Free direction for mounting due to cylindrical design.

  • The electrode strength is firm.

  • Wide TCRs are available.

  • Superior in the linearity of resistance change to temperature.

  • Suitable for reflow, flow and iron solderings.

  • roducts meet EU-RoHS requirements.

 

Applications

  • Thermal compensation for motor control circuits


 lp.pdf

Thin Film Resistance Thermal Sensors LP

Features

  • LP series is thin-film thermal sensors and accomodats resistance tolerance ±1%,

     high T.C.R. 5000×10-6/K with the standard products.

  • Suitable for control of temperatures in various industrial equipment.

  • Products meet EU-RoHS requirements.

 

Applications

  • Temperature compensation for Printer Heads .

  • Overheat prevention for Printer Heads.

  • Temperature compensation for Home Electrical Appliances, Measuring Instruments and Communications Equipment.

  • Overheat prevention of various PCBs.


Linear P.T.C. Resistors/Thick film

 la73.pdf

Thick Film Linear Positive Temperature Coefficient Flat Chip Resistors LA73

Features

  • Resistance value changes in linearly positive way to temperature.

  • Quick response to the change of temperature.

  • Suitable for both reflow and flow solderings.

  • Products with lead free termination meet EU-RoHS requirements.

    EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.


NTC Thermistors

 nt73.pdf

NTC Flat chip Thermistors NT73

Features

  • SMD type thick film NTC chip thermistors.

  • Thinner (0.5mm in 1608, 2012 sizes,0.6mm in 3216 size) than the multilayer type.

  • Excellent mountability due to higher mechanical strength.

  • Excellent mountability due to its solder plating at the terminal section.

  • Suitable for both flow and reflow solderings.

  • Products with lead free termination meet EU-RoHS requirements.

    EU-RoHS regulation is not intended for Pb-glass contained in electrode, resistor element and glass.


PTC Thermistors

 pt72.pdf

PTC Chip Thermistors (for over-temperature protection) PT72

Features 

  • Surface mount PTC thermistors.

  • Small type and light weight to reduce mounting space.

  • Excellent thermal response because of surface mount type.

  • Curie temperatures : 70°C, 80°C, 100°C are selectable.

  • Suitable for reflow soldering.

  • Products with lead free termination meet EU-RoHS requirements.

 

Applications

  • Overheat protection for power transistors and power-ICs.

  • Inverter circuits for LCD back lights.

  • Air conditioners.