64x1 线性图像传感器, 带双向移位和可扩展数据输入/输出

Features

• 64 photo pixels of 183 μm x 200 μm at a pitch of 200 μm (127 DPI)

• Integrating L-V conversion with low image lag and track-and-hold feature

• Integration time can be set externally

• Internal bidirectional shift register also permits reversed pixel data output

• Extendible data I/O enables multiple sensor operation for chain circuits

• On-chip temperature sensor data available with serial pixel output

• Error signal output with overtemperature, undervoltage and overcurrent

• All current LD types can be used (N/P/M configurations)

• Blue laser diodes supported

Applications

• Optical linear sensors

• CCD substitute

128x1 线性图像传感器, 带电子快门功能

Features

• 128 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

• Integrating L-V conversion followed by a sample-and-hold circuit

• High sensitivity and uniformity over wavelength

• High clockrates of up to 5 MHz

• Shutter function enables flexible integration times

• Push-pull output amplifier

• Pin-to-pin compatible with TSL1401 at higher speed and sensitivity

Applications

• Optical linear sensors

• CCD substitute

  
  

高分辨率CMOS线性图像传感器 - (新)

Features

• 1024 / 960 / 640 / 320 active photo pixels with 12.7 μm x 600 μm (2000 DPI)

• Pin-selectable resolution of 2000, 1000, 500 and 250 DPI (binning or averaging selectable)

• High sensitivity and uniformity over wavelength

• High pixel clock rate of up to 5 MHz

• Continuous sample and read mode

• Asynchronous, global shutter enables flexible integration times

• 3 V capable analog output with separate supply pin

• Glitch-free push-pull analog output

Applications

• Triangulation sensors

• Contact image sensors

• Spectroscopy sensors

• CCD replacement

256x1 无间隙线性图像传感器, 带电子快门功能

Features

• 256 active photo pixels of 56 μm at a gap-free pitch of 63.5 μm (400 DPI)

• Integrating L-V conversion followed by a sample-and-hold circuit

• High sensitivity and uniformity over wavelength

• High clockrates of up to 5 MHz

• Only 256 clocks required for readout

• Shutter function enables flexible integration times

• Push-pull output amplifier

• Function equivalent to TSL1402 (serial mode)

Applications

• Optical linear sensors

• CCD substitute

64x1 线性图像传感器, 带电子快门功能

Features

• 64 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

• Integrating L-V conversion followed by a sample-and-hold circuit

• High sensitivity and uniformity over wavelength

• High clockrates of up to 5 MHz

• Only 64 clocks required for readout

• Shutter function enables flexible integration times

• Push-pull output amplifier

Applications

• Optical linear sensors

• CCD substitute

32x1线性图像传感器,带电子快门功能

Features

• 32 active photo pixels of 56 μm at a pitch of 63.5 μm (400 DPI)

• Integrating L-V conversion followed by a sample-and-hold circuit

• High sensitivity and uniformity over wavelength

• High clockrates of up to 5 MHz

• Only 32 clocks required for readout

• Shutter function enables flexible integration times

• Push-pull output amplifier

Applications

• Optical linear sensors

• CCD substitute

  
  

智能三角定位传感器芯片

Features

• Specially formed line image sensor comprising 129 elements

• High ambient light suppression of up to 100 kLux with filter glass

• Dynamic range of 100 dB

• 2 antivalent switching outputs

• Alarm message output

• High switching frequencies

• Low latency

• Current or light-power control (ACC or APC) selectable per channel

• Dual A/D converter for analog levels monitoring

• Serial programming interface (SPI or I2C compliant)

• Laser channel disable with programmable overcurrent threshold

• Low drop linear regulator for 3.3 V

• Optimized for N-type laser diodes

Applications

• Diffuse reflective photoelectric sensors

脉冲和交流光电编码器, 互补输出

Features

• Fast response amplifier with on-chip photodiode

• High interference immunity due to monolithic design

• Active photodiode area of ca. 1 mm2

• Suitable for visible light and near infrared

• Integrated band-pass filter with 140 kHz center frequency

• High LF and DC (ambient) light suppression

• Complementary analogue current source/sink outputs, transimpedance can be set by external resistor

• Single 5 to 12 V supply, low power consumption also with bright ambient light

Applications

• Amplification of pulse and AC light signals

• Receiver for through beam and reflection light barriers with background suppression (sunlight) e.g. for presence detection in power operated gates, doors and windows etc.

双重积分光电传感器, 带串接移位寄存器

Features

• Two photosensors with integrating amplifiers

• Integration time can be set externally

• Internal shift register for chain connection

• Detection of low supply voltage

• Photosensors with 1 mm pitch, active area ca. 0.97 mm x 0.47 mm

Applications

• Optical line sensors

• CCD substitute

光学位置敏感探测, 环境光抑制

Features

• Low-noise current amplifier with an integrated position-sensitive photodiode

• Effective photodiode area 2.6 mm × 0.88 mm (iC-OD), longer version with 8.4 mm × 0.88 mm available (iC-ODL)

• High sensitivity for visible light and near infrared

• Integrated bandpass filter with 100 kHz center frequency

• High background light suppression

• Analogue output as current source

• Low power consumption from 3.9 to 13.2 V supply voltage

Applications

• Position-sensitive detection of pulse lights

• Receiver for motion or proximity sensors

可调灵敏度光电开关

Features

• High spectral sensitivity

• Sensitive to visible light and near infrared

• Adjustable threshold

• Short switching time

• Supply voltage of 4.5 to 16 V

• Photosensor size: 400 μm × 400 μm

Applications

• Receiver for reflecting and nonreflecting light barriers

• Multichip modules for absolute encoders

差分霍尔开关和齿轮传感器, 带线驱动器

Features

• Dual Hall sensors set 2.0 mm apart

• Magnetic field frequency range from DC to 40 kHz

• Supply voltage range 4.5 to 36 V

• Complementary push-pull line driver outputs with integrated line adaptation

• Output stages are current limited and short-circuit-proof due to temperature shutdown

• Min. 200 mA output current at 24 V supply voltage

• Low driver stage saturation voltage (< 0.4 V at 30 mA)

• RS422-compatible (TIA / EIA standard)

• Temperature and supply voltage monitor with error messaging

Applications

• Gear wheel sensing

• Pole wheel and magnetic tape scanning

• Magnetic incremental encoders

• Proximity switches

• Two-channel line drivers up to 100 kHz

AMR 线性位置磁阻效应传感器 (间距: 2mm)

Features

• Magneto resistive position sensor based on the AMR effect

• Strong field sensor for 2 mm N/S pole pitch

• One sine/cosine cycle per pole width (averaged using a pair of N/S poles)

• High interpolation due to a sine signal with few harmonics

• Low saturation field strength

• High amplitude consistency with changes in distance

• Resistant to strong magnetic fields

• Not sensitive to external homogeneous magnetic fields

Applications

• Linear position sensing

• Length measuring systems

AMR 線性位置磁阻效應感測器 (間距:5mm)

Features

• Magneto resistive position sensor based on the AMR effect

• Strong field sensor for 5 mm N/S pole pitch

• One sine/cosine cycle per pole width (averaged using a pair of N/S poles)

• High interpolation due to a sine signal with few harmonics

• Low saturation field strength

• High amplitude consistency with changes in distance

• Resistant to strong magnetic fields

• Not sensitive to external homogeneous magnetic fields

Applications

• Linear position sensing

• Length measuring systems